How CloudSuite Industrial is priced
Infor does not publish list pricing. The iStart guide lists SaaS, or an up front named user licence fee with ongoing maintenance as a percentage of licence cost. It gives an indicative A$150 to A$200 per user per month, charged annually.
Published figures
| What | Price | Who says | Source |
|---|---|---|---|
| Indicative Infor CloudSuite licence, charged annually | A$150 to 200 per user per month | iStart ERP Buyer's Guide 2025-26 | link |
Prices change and partners quote on top of licences. Check the source before you budget.
How CloudSuite Industrial licences work
- Infor sells the cloud edition as a subscription only. ERP Research says there are no perpetual licences for the cloud editions and that most are priced per named user per month.
- Netray lists three cloud user types for SyteLine: full, limited and shop-floor. Each type carries its own monthly rate.
- Netray says the older on-premise route is a perpetual named user licence with annual maintenance of about 22% of licence cost. It says this route still suits defence contractors that need data kept on site.
- ERP Research says its per-user ranges assume 100 to 500 named users. It says smaller buyers may land at the top of the range or meet a minimum commitment.
- ERP Research reports a typical 3 year minimum term with annual price rises of 3% to 5%. It suggests negotiating the rise down to 2% or 3% or fixing the price for the full term.
- The iStart guide separates the subscription option from the up front named user licence with a maintenance percentage.
What adds to the cost
- Implementation by an Infor partner
- Ongoing software maintenance as a percentage of licence cost
- Add-on products such as MES, WMS, PLM and CPQ
- Data migration and integrations, which ERP-Pilot lists outside the base price
- Third party add-ons, which Netray says can add a large first-year cost
- On-premise servers, which Netray lists as an up front cost on the older route
- Internal staff time, which ERP Research says can add 20% to 40% to a project
What to ask for in a quote
- Ask Infor or EMDA to split your user count into full, limited and shop-floor users before they price anything.
- Request the term length and the yearly rise written into the subscription. Reports mention 3 years and 3% to 5%.
- If you are weighing on-premise, ask for the maintenance percentage on the perpetual licence and what that covers.
- Get MES, WMS, PLM and CPQ priced as separate lines so you can see the core cost on its own.
- Ask for a fixed price or a day rate cap on data migration and integrations, because review sites list them outside the base price.
- Ask whether a 15% contingency for a first Infor project belongs in your budget, as Netray suggests.
Implementation
Infor partners. The iStart guide lists EMDA. ERP Research lists 6 to 12 months for 100 to 300 users. Netray gives 4 to 6 months for a small single site project (under 30 users), 8 to 12 months for 50 to 150 users and 12 to 24 months for multi-site. Netray also says services usually run 1.5 to 2.5 times the first year licence. Infor does not publish these figures. Your EMDA quote is the number that counts.
How similar ERPs are priced
| ERP | How it is priced | Price list |
|---|---|---|
| Kinetic | Cloud is a monthly or annual licence that includes software, maintenance, helpdesk support, hosting and administration. | Quote |
| SAP B1 | Priced per named user, by user type (Professional, Limited and Starter), as a subscription or a perpetual licence, sold through SAP partners. | Quote |
| NetSuite | Quote based. | Quote |
| SYSPRO | Named-user subscription. | Quote |
| Sage X3 | Price on enquiry through a partner. | Quote |
Side by side: CloudSuite Industrial vs Kinetic, CloudSuite Industrial vs SAP B1 and CloudSuite Industrial vs NetSuite.
More about CloudSuite Industrial
Supplier bills on top of any ERP
Pulsify reads supplier invoices, codes each line, routes bills for approval and checks them against purchase orders and agreed prices before they reach the ERP. Pulsify connects to CloudSuite Industrial. We set up the connection for you.
Step-by-step AP guides: CloudSuite Industrial how-to guides.
Sources
Last checked 2026-10-20.
- istart.co.nz/wp-content/uploads//2019/05/2025-ERP-Buyers-Guide_Infor.pdf
- www.infor.com/products/cloudsuite-industrial
- istart.co.nz/wp-content/uploads//2025/04/2025-ERP-Buyers-Guide_Features-vs-Price.pdf
- www.netray.co/resources/syteline-implementation-cost-guide
- www.erpresearch.com/en-us/blog/infor-cloudsuite-pricing-breakdown
- www.erp-pilot.com/erp/erp-prices/infor-cloudsuite-pricing
- docs.infor.com/csi/9.00.x/en-us/useradminlist/csi_Financials_User_Guide_42982.pdf
Common questions
How much does Infor CloudSuite Industrial cost in Australia?
Infor does not publish list prices. The iStart ERP Buyer's Guide gives an indicative A$150 to A$200 per user per month for Infor CloudSuite, charged annually. Implementation is extra.
Is SyteLine the same as CloudSuite Industrial?
Infor's SyteLine page calls CloudSuite Industrial the cloud-based evolution of SyteLine ERP. The two names are used side by side, and partner Visual South labels the product CloudSuite Industrial (SyteLine).
What licence types does Infor CloudSuite Industrial have?
The cloud edition is a subscription priced by named user. Netray lists full, limited and shop-floor user types. The older on-premise route is a perpetual named user licence plus yearly maintenance.
Does the CloudSuite Industrial subscription price rise each year?
ERP Research reports annual rises of 3% to 5% on a typical 3 year minimum term. Check the rise and the term in your own contract.
What does an Infor CloudSuite Industrial project cost on top of the licence?
Netray says services usually run 1.5 to 2.5 times the first year licence, and allows 4 to 6 months for a small site and 8 to 12 months for 50 to 150 users. Infor does not publish these figures.
Want this done for you?
Book a call to see how Pulsify works with CloudSuite Industrial.